Remote 1000kg Copper Garage Roller Shutter Motors Commercial Use
GATECH is specialized in the production of rolling shutter motors
and its control system.Our major lines include AC and DC rolling
door motors. This roller shutter motor has been continuously
exported for over ten years and is our hotting product, it uses the
most advanced production technology and the latest technology
available to provide reliability with multiple functions.
1. 100% copper wire inside the motor.
2. Transmission mechanism has reasonable design, advanced
technology, and specially developed grease, gear not easy wear,
durable, low noise, small shaking.
3. Protective measures : Placed inside the motor overheat
protector, overheating protection function.
4. Low-voltage and high-DC powermoter, low consumption;
5. Easy manual operation when power failure and it could also be
equipped with electrical storage devices;
6. Limit switch unit enables precise adjustment of doors in up and
down position;
7. With convenient , stable function of remote control ,long
distance remote operation is available;
| Model | Rated output torque (N.m) | Rated output speed (r/min) | Motor power (w) | Rated voltage (V/Hz) | Rated current (A) | Continuos working time(min) | Durm dube outer diameter (mm) | Max lifting force (kg.f) | Max lifting height (m) |
| AC300-1P | 225 | 5.4 | 200 | 220/50 | 2.8 | 8 | 114 | 300 | 6 |
| AC600-1P | 412 | 5.4 | 300 | 220/50 | 3.3 | 8 | 140 | 600 | 6 |
| AC800-1P | 647 | 4 | 400 | 220/50 | 4.7 | 8 | 165 | 800 | 8 |
| AC1000-1P | 809 | 4 | 400 | 220/50 | 4.9 | 8 | 165 | 1000 | 8 |
| AC1500-1P | 809 | 3.5 | 700 | 220/50 | 8.2 | 8 | 165 | 1500 | 9 |
Installation Precautions
● The roller shutter door motors should be installed exactly
horizontally with precision.
● The roller axle of the shutter should be homocentric and
horizontal .
● The roller shutter should be free of any obstructions.
● The vertical hanging length of the chain must be adjusted within
3-6mm-adjustment should be made before hanging the shutter onto the
roller axis.
● It is strictly forbidden to pull on the motor down lead.
● External power cord should be ≥1.0mm diameter.
● Special attention should be given to protecting the motor from
humidity and rain, to prevent short-circuiting.
● The motor must be satisfactorily to prevent potential injury from
shocks .The earthing connection bolts should be fixed to the chain
wheel support board or electric appliance control box.
● The switch box has to be installed on the dry wall and placed at
a high of over 1.5 meters high, this is to ensure that children
couldn’t operate and remote controller.
● The disabled and the people lack of experience (including the
children) are forbidden to operate the shutter door motors,unless
they are guarded by someone could respons for their safety or
reading the instructions carefully in advance.
